Hope Kerchief Project

PROJ-000001

$10.00

It’s the time of year when adventure is in the air. The snow is melting, sprouts are trying to come up from the ground, and it is not quite warm enough to go out without some layers. I personally love an oversized neck kerchief. It is just something easy that I can wrap around my neck, tuck the corners under my coat collar and I am ready to explore the outdoors. It is warm, a little punk rock, and I don’t fear catching the end of the scarf on something.

Product Description

Hope Neck Kerchief PacketIt’s the time of year when adventure is in the air. The snow is melting, sprouts are trying to come up from the ground, and it is not quite warm enough to go out without some layers. I personally love an oversized neck kerchief. It is just something easy that I can wrap around my neck, tuck the corners under my coat collar and I am ready to explore the outdoors. It is warm, a little punk rock, and I don’t fear catching the end of the scarf on something.

In this project you will make a 36″x36″ neck kerchief, Included with the purchase are 4 files. Theres a WIF and an PDF project file for a small loom, 22″-46″ weaving width. The project file PDF will guide you through the steps of making a kerchief by weaving two panels, sewing them together, and finishing the hems. There is also a WIF and PDF file for looms over 46″ that will guide you though making a kerchief by weaving one piece of fabric and then finishing the hems.

Small loom project notes:

Equipment Required: Four shaft loom, 24” weaving width; 10 dent reed; 1 shuttle.
Weave Structure: Undulating Twill, woven in two panels and sewn together.
Warp Yarn: 5/2 Cotton (~2,100 yd/lb), Charcoal 1,296 yd. (~11 ounces) and California Gold 532 yd. (~5 ounces).
Weft Yarn: 3/2 Cotton (~1,200 yd/lb) or 2/12.8 nM Raw Silk, black 400 yards (6 ounces)
Warp Order and Length: Wind 457 ends 4 yds long following the color order in the winding the warp section.
Warp Spacing: 20 ends per inch (2/dent in a 10 dent reed). Width in the reed: 22”
Weft Spacing: 14-16 picks per inch, woven length 45” per panel.
Finished Dimensions: After washing and hemming produces one 36” x 36” shawl.

Large loom project notes:

Equipment Required: Four shaft loom, 48” weaving width; 10 dent reed; 1 shuttle.
Weave Structure: Undulating Twill.
Warp Yarn: 5/2 Cotton (~2,100 yd/lb), Charcoal 1,296 yd. (~11 ounces) and California Gold 532 yd. (~5 ounces).
Weft Yarn: 3/2 Cotton (~1,200 yd/lb) or 2/12.8 nM Raw Silk, black 400 yards (6 ounces)
Warp Order and Length: Wind 913 ends 3 yds long following the color order in the winding the warp section.
Warp Spacing: 20 ends per inch (2/dent in a 10 dent reed). Width in the reed: 46” (45.65”)
Weft Spacing: 14-16 picks per inch, woven length 46”.
Finished Dimensions: After washing and hemming produces one 36” x 36” shawl.

Product Specifications

Prereqes

Know how to warp your loom., Know how to weave.

Requirements

4 Harness Loom 22" or wider.

Reviews

There are no reviews yet.

Be the first to review “Hope Kerchief Project”

Your email address will not be published. Required fields are marked *